WM-1000 Single-Channel Wall-Mount Intercom System - Product - Midwich

Single-channel wall mount intercom system

• Intercom Listen Key:  Both momentary (push-to-listen) and latching (hands-free listen) are possible.
• Call Key: Used to send call signals on the intercom channel and to indicate incoming calls.

• Intercom Talk Key: Both momentary (push-to-talk) and latching (hands-free talk) are possible. Additionally, the WM-1000 / WM-2000 have a feature called “mic kill receive” which lets an operator at a remote master station (such as the US-2002) turn off the talk key.

• Dynamic-Mic Headset Connector: 4-pin male XLR connector accepts headsets with monaural headphones and either a balanced or unbalanced dynamic microphone.

• Volume Control: Adjusts intercom volume to headset.

• Audiocom / Clear-Com Selector Switch: The selector switch sets the intercom station for compatibility with either Audiocom or Clear-Com channel connector pin-outs, channel power requirements, and call signaling requirements.

• Configuration DIP switches DIP switches are provided to enable/disable the following features: Call Beep: An optional call beep tone can be used for incoming call notification. Headset Microphone

• Type Selection: Balanced or unbalanced microphone may be selected. DC Call Enable: This may be turned on to use the intercom station with intercom systems that use DC call signaling.

• Connections Terminal Block: Used to connect intercom channel(s) and an optional local power supply.

• Sidetone Trimmers: These are used to adjust the level of the station operator’s own voice in the headphones.

• Mounting Holes: The mounting holes fit any standard, two-gang electrical box

• Clear-Com Compatible

This product is not CE certified.

Wall-mount, one-channel headset station. Mounts in a standard electrical outlet box (doublewide type). High-quality audio system with mic limiter circuit. Back-lit control buttons for low-light operation. Talk and listen buttons with momentary/latching operation. Call/send button with call/receive indicator light. Call/receive beep tone with on/off selection. Mic Kill Receive with on/off selection. Side tone trimmer. Quick-connect, wire clamp terminals for party-line wire connections. Four-pin male XLR headsets (balanced or unbalanced microphone). Powered from party-line, local power optional. Clear-Com compatible.